Diese Seiten sind unsere internen Protokolle aus dem Labor.
Aufgrund der fortlaufenden Protokollierung der Ergänzungen sowie der Verbesserungen ist die Reihenfolge / Chronologie der Seiten aus dem Ruder gelaufen - leicht durcheinander geraten.
.
Die barebox Kommandos für "embedded systems" - (command_reference Shell Commands)
This section describes the commands which are available on the Barebox shell.
Barebox, as a bootloader, usually shall start the Linux kernel right away. (Das habe ich nicht verstanden - ist in Barebox bereits ein Minikernel eingebaut ?)
However, there are several "use cases" around which make it necessary to have some (customizable) logic and interactive scripting possibilities. In order to achieve this, Barebox offers several commands on it's integrated commandline shell.
- Die wichtigste Aussage hier zum Verstehen der Funktion des Loaders ist, daß der barebox bootloader mit seinem Mini-Kernel eine der bash-Shell sehr ähnliche Shell beinhaltet. Damit kann der Loader bereits boot- oder init- oder start-Scripte und dort aufgerufene Befehle ausführen.
The following alphabetically sorted list documents all commands available in a Barebox:
.
| _name | ||
| addpart_command | ||
| alternate | ||
| bmp_command | ||
| bootm_command | ||
| bootu | ||
| bootz | ||
| cat_command | ||
| cd_command | ||
| clear_command | ||
| clko | ||
| cp_command | ||
| cpufreq | ||
| cpuinfo | ||
| crc_command | ||
| crc32 | ||
| delpart_command | ||
| devinfo_command | ||
| dfu_command | ||
| dhcp | ||
| dump_clocks | ||
| echo_command | ||
| edit_command | ||
| erase_command | ||
| ethact | ||
| exec | ||
| exit | ||
| export_command | ||
| false | ||
| getopt | ||
| gpio_get_value_command | ||
| gpio_set_value_command | ||
| gpio_direction_input_command | ||
| gpio_direction_output_command | ||
| go | ||
| help | ||
| host | ||
| i2c_probe | ||
| i2c_read | ||
| i2c_write | ||
| icache | ||
| iminfo | ||
| insmod | ||
| linux16_command | ||
| loadenv_command | ||
| loadb | ||
| loady | ||
| loadxc | ||
| login | ||
| ls_command | ||
| lsmod | ||
| md | ||
| memcmp | ||
| meminfo | ||
| memset | ||
| menu | ||
| mkdir | ||
| mount_command | ||
| mtest | ||
| mw | ||
| mycdev | ||
| nand | ||
| nand_boot_test | ||
| nfs | ||
| passwd | ||
| ping | ||
| printenv_command | ||
| protect_command | ||
| pwd | ||
| readline | ||
| reset | ||
| rarpboot | ||
| reginfo | ||
| rm | ||
| rmdir | ||
| saveenv_command | ||
| setenv_command | ||
| sh | ||
| sleep | ||
| source | ||
| test | ||
| timeout | ||
| true | ||
| tftp_command | ||
| ubiattach | ||
| ubimkvol | ||
| ubirmvol | ||
| umount | ||
| unlzo | ||
| unprotect_command | ||
| usb | ||
| version |